Pond supplies in Atlantic Canada
New Brunswick Pond Supplies Nova Scotia Pond Supplies
Français
Acadian Aquatic Systems
Air Blowers, Air Pumps & Air Compressors
Sales & Information
Phone: 506-204-8050 | Toll Free: 866-533-2863 | Email info@acadianaquaticsystems.ca | Mobile Website


Air Blowers & Air Compressors



Regenerative Air Blowers Canada
2017 Canadian Price List in PDF Format

Regenerative blowers can reach higher pressures with effective duty to 65 inches, operate in more corrosive environments and operate at lower noise levels than industry standard commercial blowers. They are inexpensive to operate, and the air they deliver is oil-free. They are extremely energy-efficient. Regenerative air blowers are simple, and simplicity means reliability.

The blowers we provide have only one moving part: a dynamically balanced impeller that is attached directly to the motor shaft.

The rotating impeller doesn't touch a thing, so there's no wear, no vibration, no seals and no lubrication. Maintenance involves just washing the inlet air filters as needed and replace the motor bearings after three years of continuous operation.

All blowers come with internal mufflers and low-restriction, washable inlet filters as standard equipment. Outlet flex hoses, which simplify installation, are also standard equipment. The blower's electric motor is a high-efficiency type motor that will run cool and handle a wide range of power variations so often found in rural locations. Automatic thermal overload protection is standard.

Should a power brownout occur and trip the motor, the blower will automatically restart after cooling. Motors are completely enclosed and fan cooled for the highest reliability in a humid aquaculture environment. Each blower is assembled with antiseize compound, performance tested prior to shipment and guaranteed by the manufacturer for three years.

All are UL-listed, CSA-certified and CE-compliant.

Altitude High altitude will affect blower performance. Deduct 4% of volume and pressure for every 1,000' (300 m) above sea level.

Starting the Regnerative Blower
The 3,450-rpm motors that are used on these regenerative blowers require about ten seconds to reach full speed. During this period, power draw is much higher than normal. See specifications for both starting watts and running watts. Use starting watts to size generators and use full load amps to size breakers.

Additional Information
Single-phase blowers up to and including 1 hp are supplied with a 8' power cord. All other blowers are shipped without cords.

All blowers come with inlet air filters and flexible pipe connectors as standard equipment. Three-year warranty begins on date of shipment. Double the pressure by using two blowers of the same size, with one blowing into the other.

3-Phase Equipment
We highly recommend using protective devices with all 3-phase equipment. Motor starters, phase monitors and phase protectors are not included in the sale and should be sourced locally. Failure to install protective devices will void most warranties. We also recommend that a certified electrician perform the installation of 3-Phase blowers.

2017 Canadian Price List
in PDF Format

Model
CFM FREE AIR @ INCHES WATER
MAX DUTY
HP
PHASE
NO. FILTERS
RUNNING WATTS @ INCHES WATER
MAX STARTING
WATTS
VOLTAGE
RATED FULL LOAD AMPS
HEIGHT W/O FILTER
WIDTH
OUTLET HOSE PIPE SIZE
WEIGHT
20"
30"
40"
50"
APS11A
13
3
-
-
34"
1/8HP
1
1
198W/20"
900W
110/220
2.0A/110V
10"
8"
1"
23 lbs
APS21
27
19
7
-
43"
1/3HP
1
1
377W/30"
1,800W
110/220
3.8A/110V
10"
9"
1"
28 lbs
APS31
34
28
21
16
56"
1/2HP
1
1
471W/30"
2,000W
110/220
5.6A/110V
10"
10"
1.5"
36 lbs
APS313
34
28
21
16
56"
1/2HP
3
1
410W/30"
4,000W
220/440
2.0A/220V
10"
10"
1.5"
36 lbs
APS41
70
65
53
36
58"
1 HP
1
1
971W/40"
4,000W
110/220
9.8A/110V
12"
12"
1.5"
50 lbs
APS43
70
65
53
36
58"
1 HP
3
1
850W/40"
5,000W
220/440
3.2A/220V
12"
12"
1.5"
50 lbs
APS45
110
100
90
80
65"
1.5HP
1
2
1,430W/40"
9,000W
110/220
10.4A/220V
14"
15"
2"
77 lbs
APS453AQ
110
100
90
80
65"
1.5HP
3
2
1,500W/40"
12,000W
220/440
4.9A/220V
14"
15"
2"
85 lbs



Rotary Claw Air Compressors Canada


The rotary claw series positive displacement pressure pumps feature a compact rotary claw design that is air cooled, dryrunning and non-contacting.

These features along with quality construction results in a pump that offers extremely high reliability and a long service life.

Non-contacting Design – eliminates internal wear and parts to replace Air Cooling – no water levels to check and no cooling system to maintain Dry-Running – no sealing or lubricating oil is needed in the pumping chamber, so there is minimal maintenance.

Operating costs are low because of the maintenance-free design and the reduced power requirements made possible by the pumps’s high volumetric efficiency along with a noncontacting pumping chamber. Inside the pump housing, two claw shaped rotors take in air as they rotate in opposite directions.

The air is compressed by the rotors,then discharged through a silencer to atmosphere. The non-return valve incorporated into the inlet flange prevents air from back flowing through the pump when the pump is turned off. The rotary claw pressure pumps are directly driven by a flanged motor, and the two rotors are synchronized by gears.

A wide range of accessories allows optimum adaptation to many applications and these dry rotary claw pressure pumps are used across a broad range of industries for many different applications and are well suited to applications where dust particles may be present.

Rotary claw pressure pumps are especially suited to: Beverage Industry | Environmental Technology | Aeration | Pneumatic Conveying | Printing Industry

Model
OPEN
AIRFLOW
MOTOR
SIZE
MAX
PRESSURE
OUTLET SIZE (NPT)
WEIGHT
AP1104BP
44 CFM
3 HP
13 psi
1.25"
381 lbs - 400 lbs
4 HP
22 psi
5.5 HP
31 psi
AP1144BP
57 CFM
4 HP
13 psi
1.25"
4031 lbs - 432 lbs
4.5 HP
22 psi
7.5 HP
31 psi
AP1102BP
79 CFM
7.5 HP
13 psi
1.25"
425 lbs - 445 lbs
10 HP
23.5 psi
11.5 HP
31 psi
AP1142BP
103 CFM
10 HP
13 psi
1.25"
448 lbs - 520 lbs
11.5 HP
19 psi
17 HP
31 psi
AP1202AP
135 CFM
10 HP
11 psi
2"
520 lbs
11.5 HP
16 psi
23.5 HP
31 psi
AP1252AP
165 CFM
11.5 HP
11 psi
2"
528 lbs - 550 lbs
17 HP
22 psi
23.5 HP
31 psi
AP1322AP
200 CFM
17 HP
13 psi
2"
550 lbs
23.5 HP
23.5 psi
29 HP
31 psi



Rotary Vane Air Compressors Canada

Rotary vane compressors can provide air to moderate depths up to 27 feet and are the only compressor made specifically for the aquatic industry and aeration industry. These motor-mounted, oilless rotary vane compressors are compact, easy-to-service and excellent for moderate-pressure, continuous-duty applications.

They more than double the air output of piston compressors with better longevity. Sacrificial oilless carbon vanes automatically adjust as they wear to maintain efficiency. Thermal overload protection, air filter, inlet check valve and 8' power cord is included.

Ten-psi models work to a depth of 18 feet and 15-psi models work to 27 feet, depending on tubing diameter and distance. The only wearing parts are carbon vanes, which can be replaced in about 15 minutes using common tools (in continuous operation, vanes last 9 to 18 months, depending on operating pressure).

Rotary vane compressors are performance tested and covered by a one-year warranty (not including air filters, vanes, water damage or lightning damage). Single-phase models are 115V if not specified; three-phase are 230V.

Check valves are recommended where long underwater runs of air tubing can fill with water when the compressor is off. Three-phase models ship with vanes removed. 3-Phase Equipment We highly recommend using protective devices with all 3-phase equipment.

Motor starters, phase monitors and phase protectors are not included in the sale and should be sourced locally. Failure to install protective devices will void most warranties. We also recommend that a certified electrician perform the installation.

Model
CFM @ 5 PSI
CFM @ 10 PSI
MAX
PRESSURE
Running Amps
Motor Size
Ship Weight
APAQ32
4 CFM
3.6 CFM
10 PSI
5.0 AMPS
1/4 HP
34 lbs
APAQ5
7.2 CFM
6.8 CFM
15 PSI
10.2 AMPS
3/4 HP
53 lbs
APAQ52
7.5 CFM
6.8 CFM
15 PSI
8.2 AMPS
3/4 HP
58 lbs
APAQ7
9.5 CFM
8.8 CFM
10 PSI
10.7 AMPS
3/4 HP
53 lbs
APAQ73
9.5 CFM
8.8 CFM
10 PSI
2.1 AMPS @ 220 VOLTS - 3 PHASE
3/4 HP - 3 PHASE
60 lbs
APAQ9
11.8 CFM
10.1 CFM
10 PSI
11.2 AMPS
1 HP
62 lbs
APAQ93
11.8 CFM
10.1 CFM
10 PSI
2.2 AMPS @ 220 VOLTS - 3 PHASE
1 HP - 3 PHASE
62 lbs


Rocking Piston Air Pumps Canada
Contact us for the Canadian price list

Continuous-duty oil-free rocking piston air compressors are the highest performing piston compressors available. They are the perfect choice for aerating small ponds or deep water applications. They come equipped with noise reducing intake air filter, pressure relief valve, 6-foot power cord and thermal overload protection. 1/3 hp, 20 psi max continuous duty, 1/4 FNPT outlets.

Available in single cylinder or dual cylinder models.

Single piston model provides 1.6 CFM @ 20 PSI and operates at 4.4 AMPS. Open flow airflow is 2.2 CFM.

Dual piston models are available in 1/2 HP and 3/4 HP and provide 2.9 CFM @ 20 PSI for the 1/2 HP model amd 4.2 CFM @ 20 PSI and operates at 5.3 AMPS for the 1/2 HP and 5.4 AMPS for the larger model. Open flow airflow is 3.5 CFM for the small dual cylinder and 5.2 CFM open air flow for the larger dual cylinder pump.


Model
CFM @ PSI
HP
PHASE
NO. FILTERS & OULETS
0 PSI
10 PSI
20 PSI
25 PSI
APSQ101
2.2
2
1.6
1
1/3 HP
1
1
APSQ201
3.5
3.2
2.9
2
1/2HP
1
2
APSQ401
5.2
4.8
4.2
3
3/4HP
1
2

 


Pump information request form

Name or Company *
Email *
Confirm Email *
Address

Submit your questions regarding your needs for air pumps. ie: size of pond, current problems, products required, etc.
Questions or comments *


To prevent spam and automated requests, and so we know you are a real person, please enter the two words you see below.



Powered byEMF Online Form Builder
Report Abuse

Atlantic Pond Supply
Atlantic Pond Supply has pumps, filters and skimmers as well as complete pond kits and Microbe-lift bacteria and pond care products. Serves Canada .
http://www.atlanticpondsupply.ca

Commercial & Wastewater Ponds
Wastewater & Industrial System

Aeration supply for leachate ponds, stormwater retention ponds, catch basins, compost basins, agricultural and irrigation basins and ponds. We can supply turn-key systems for aeration and deicing as well as a range of natural bacterial blends to assist in achieving discharge parameters for oil and gas, pulp and paper as well as composting and waste processing facilities. Natural remedial beneficial bacteria for muck reduction, BOD reduction, algae control, cyanobacteria control, nutritent reduction, hydro-carbon clean-up and general basin remediations. Experience with the mining and oil industry as well as private companies such as composting companies, opil and gas, and meat processing firms.


Industrial & Wastewater Ponds
Aeration supply for leachate ponds, stormwater retention ponds, catch basins, compost basins, agricultural and irrigation basins and ponds. Natural remedial beneficial bacteria for muck reduction, BOD reduction, algae control, cyanobacteria control, nutritent reduction, hydro-carbon clean-up and general basin remediations. Experience with the mining and oil industry as well as private companies.
Municipal Ponds
Assistance with beautification and cleaning of municipal waterways, treatment plants, public parks and storwater ponds or canals. Supply of fountains, aeration systems, safe and natural bacteria treatments for ponds and lakes as well as expertise to design and implement nutrient reduction programs with aeration and comprehensive town aquaric management and enhancement with fountains and water features.
Golf Course Ponds
Golf course fountains and care for golf water features and ponds. Algae control, algaecides, pumps and aeration parts, compressors, diffusers and everything for golf course care and total pond maintenance. We design and recommend systems for free based on size, budget and individual needs.

Private Lakes & Ponds
Algae control, fountains, pond dyes, spray nozzles, surface or lake-bed aeration systems and water level control structures, valves and gates for pond construction. Natural pond bacteria for fish ponds, aquaculture and home owner associations.
Small Water Gardens
Affordable garden pond fountains, pumps and aeration. Koi and fish pond products and service. Dyes, pond liners, underwater lighting and decorative accesories for small backyard ponds and water gardens.

 

Acadian Aquatic Systems is independently owned and operated and is based in New Brunswick. providing sales, service, design and expertise for owners and managers of private, industrial, municipal, wastewater ponds throughout Canada.

We also service the Eastern Seaboard of the USA including Maine. Massachusetts, Connecticut, New York, New Jersey, Delaware, Maryland, Virginia, North Carolina, South Carolina, Georgia, Florida as well as anywhere in Canada and the United States and Quebec.


Acadian Aquatic Systems
independently owned Canadian business serving large and small commercial and private pond owners with solutions for diversity and efficiency.

Sales & Information
Direct: 506-204-8050 Toll Free 866-533-2863
Email info@acadianaquaticsystems.ca

Mobile Website

AcadianAquaticSystems.ca
© 2016



eXTReMe Tracker